BOROFLOAT® 33, EAGLE XG® or fused silica: how do you choose?
BOROFLOAT® 33, EAGLE XG® or fused silica: how do you choose?
A reusable blog detail page framework: body copy, table of contents, parameter comparison, related reading and CTA.
All three glasses can be processed into windows, substrates or precision parts, but they solve different problems. When selecting, look first at operating temperature, thermal expansion, spectral range, thickness and downstream processing, and only then at the material name.
Start from the Application Conditions
If a part must endure significant temperature differences, thermal expansion is usually more important than "how transparent it is". If it is used in a UV or laser optical path, the operating band directly determines whether fused silica is needed. For thin display or electronic substrates, material thickness, alkali content and sheet surface quality may become the primary conditions.
How the Three Materials Differ in Positioning
| Material | Priorities | Typical Directions |
|---|---|---|
| BOROFLOAT® 33 | Low thermal expansion, thermal stability, conventional precision processing | Windows, substrates, laboratory and industrial parts |
| EAGLE XG® | Thin glass, low alkali, display/electronic substrate characteristics | Thin glass for displays, electronics and sensors |
| Fused Silica | Ultra-low thermal expansion, broad spectrum, high temperature and optical performance | Optical windows, lasers, semiconductors, high temperature |
Materials Must Also Match the Process Route
For the same 100 mm-class glass window, different materials can behave differently in brittleness, edge damage and surface response during cutting, edge grinding, polishing and drilling. Material pages and processing pages should link to each other rather than stand completely apart.
What to Include in an Enquiry
- Material grade, or the range of acceptable alternative materials
- Outline dimensions, thickness, quantity and application
- Critical faces, edges, hole positions and surface requirements
- Whether cleaning, coating, bonding or clean packaging is required
Not sure whether to choose the material or the process first?
Give the application conditions and the part drawing to the engineering team together, and materials and processing can be reviewed in parallel.
Related Reading
Why does glass cutting cause chipping?
When is laser drilling the right choice for glass?
